Perbandingan Ketebalan Serat Terhadap Tensile Strength pada Komposit Plastik Daur Ulang(PET,PP DAN PE) dengan Menggunakan Penguat Fiber Glass
DOI:
https://doi.org/10.53912/iejm.v2i2.78Abstract
Penelitian ini memaparkan tentang perbandingan kualitas komposit yang diolah dari limbah plastik Polietilenateraptalat (PET), Polipropilen (PP) dan Polietilen (PE) dengan menggunakan penguat fiber glass dan bahan pelunak softenning agent o-kloro fenol serta xilena. Penelitian ini dilakukan di laboratorium USU dengan menggunakan metode pengepresan dengan hot press. Temperatur leleh maksimum yang didapatkan untuk masing-masing limbah plastik tersebut yaitu PET 265 oC, PP 167 oC, dan PE 135 oC. Tensile Strenght yang terbaik diperoleh terhadap masing-masing komposit antara lain, untuk komposit PET - 1 lapis serat 121.70 Mpa, PET – 2 lapis serat 209.40 Mpa, PET - 3 lapis serat 394,96 Mpa, sedangkan untuk komposit PP – 1 lapis serat 142.50 Mpa, PP - 2 lapis serat 254,40 Mpa, PP - 3 lapis serat 197.50 Mpa, serta untuk komposit PE - 1 lapis serat 110.00 Mpa, PE - 2 lapis serat 122.20 Mpa, komposit PE - 3 lapis serat 227,5 Mpa.
Downloads
Published
Issue
Section
License
Copyright
Authors published in this journal agree to the following terms:
1. The copyright of each article is retained by the author (s).
2. The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
3. Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work.
5. Articles and all related material published are distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
License
Industrial Engineering Journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits
