Design of Jigs and Fixtures for Hydraulic Press Machine
DOI:
https://doi.org/10.53912/iejm.v1i1.131Abstract
This paper presents the design of jigs and fixtures for hydraulic press machine in manufacturing industries. The current problem in industry is facing the utilization of hydraulic press machine when the demand has increased which occurs on the gripping or holding the workpiece securely. The main objective of this study is to propose a new design of jigs and fixtures for hydraulic press to carry out the gripping problem from existing design. Several design concepts were generated and simulated to analyze using ANSYS software. The design parameters such as maximum deformation, maximum shear stress, number of contact faces, and maximum holding force were presented. Based on the simulation result, the improvement of new jigs and fixtures design for hydraulic press machine was achieved.
Downloads
Published
Issue
Section
License
Copyright
Authors published in this journal agree to the following terms:
1. The copyright of each article is retained by the author (s).
2. The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
3. Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work.
5. Articles and all related material published are distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
License
Industrial Engineering Journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
You are free to :
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially
Under the following terms :
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits
